| Ethernet | |
|---|---|
| Operating Mode | Store and Forward, L2 wire-speed/non-blocking switching engine |
| MAC addresses | 1K |
| Packet Buffer | 1 Mbits |
| Backplane / Switching Fabric | 1.6Gbps |
| RJ45 Copper ports | |
|---|---|
| Speed | 10/100 Mbps |
| MDI/MDIX Auto-crossover | Support straight or cross wired cables |
| Auto-negotiation/Duplex | 10/100 Mbps speed auto-negotiation; Full & Half Duplex |
| Ethernet Port Protection | 1.5KV VRMS 1minute(Hipot), 2KV surge immunity on RJ45 Copper ports |
| Fiber Ports | |
|---|---|
| Port Types supported | 100 Base Fix type SFP |
| Filter port connector | LC connector for fiber ports |
| Optimal fiber cable | Typical 50 or 62.5/125 μm for multimode (mm) Typical 8 or 9/125 μm for single mode (sm) |
| RJ45 Copper ports | |
|---|---|
| Speed | 10/100 Mbps |
| MDI/MDIX Auto-crossover | Support straight or cross wired cables |
| Auto-negotiation/Duplex | 10/100 Mbps speed auto-negotiation; Full & Half Duplex |
| Ethernet Port Protection | 1.5KV VRMS 1minute(Hipot), 2KV surge immunity on RJ45 Copper ports |
| Protocols & Standards |
|---|
| IEEE 802.3 , IEEE 802.3x, Flow Control, Back Pressure, TCP/UDP |
| Indicators | |
|---|---|
| Power status indication | Power Input status |
| Ethernet port indication | Link & speed |
| Environmental and Compliances | |
|---|---|
| Operating Temperature | -40~75ºC (Cold startup at -40ºC) |
| Storage Temperature | -40~85ºC |
| Humidity | 5~95% (Non-Condensing) |
| Vibration, shock, free fall | IEC-60068-2-6, -27, -32 |
| Certification Compliance | CE, FCC |
| Electrical safety | CE |
| EMC | FCC Part 15, CISPR 22 (EN55022) Class A IEC-61000-4-2, -3, -4, -5, -6 (Level 3) |
| RoHS & WEEE | RoHS (Pb free) and WEEE Compliant |
| MTBF | >25 years |
| Mechanical | |
|---|---|
| Protection | IP30 |
| Dimension | 109.2mm(H) x 29.1mm (W) x 89.4mm (D) (without DIN rail kit) |
| Weight | 395 g |
| Installation | DIN-Rail mounting; Wall mounting |
| Relay Output | 1A, 24V, Normal Open |
